Important things you must Know
- Users must have a proper backup of your data, apps and settings.
- USB Debugging must be enabled.
- Ensure that the device is fully charged
Odin works only in Windows. Users of other platforms like Linux OS (such as Ubuntu) or Mac OS should use CrossOver Utility to run Odin in their OS.
Note : The users must proceed at their own risk while trying out the manual installation
HOW TO INSTALL
- First of all you need to find update file for your android phone that you are using. you can comment down if u can’t find files for your android phone i can find for you .
- the you need oDin with the help of this software you can update your phone Download Odin 3.07 here.
- Power off the phone and put it on the Download Mode. To do this, press and hold the Volume Down and Home buttons while pressing the Power button until the Samsung appears on the screen.
- Run Odin as an Administrator.
- Connect phone to your computer via the USB cable while in Download mode. If the device is connected properly, one of the ID: COM boxes will turn yellow with the COM port number.
- In Odin, select the following files from extracted from the download file firmware folder:- Click on PDA and select the .tar file with CODE in its name- Click on Phone and select file with MODEM in its name (Ignore this step if there is no such file)- Click on CSC and select file with CSC in its name (Ignore this step if there is no such file)- Click on PIT and select the .pit file. Use this file only if you get it while extracting the zip file mentioned in Step 1 or else just ignore it.
- (Note – In case the extracted zip files do not have any modem, CSC or .pit file, it means that you do not require them. It’s the file with .tar.md5 extension that is a must-have and should be flashed through PDA section)
- In the Odin, ensure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected.
- Click on the Start button in Odin to begin the installation process.
- Once flashing is done, you will see a PASS message with a green background in the left-most box at the top of the Odin. The device will now restart on its own. After you get the Samsung logo on the home screen, unplug the device from the computer.
- now if you’r phone stuck on the Samsung logo follow this post to unbrick your phone easily don’t panick while doing this steps Unbrick Android Phone.
- you can easily unbrick follow the post given on the upper post
- if your phone start then now your running on the jelly bean android go to settings >> about phone >> android version 4.1 jelly bean
This is all how to Upgrade Any Phone to Jelly Bean
PLEASE NOTE: If any lose or damage you need to go to Samsung care center to get regain access to your phone. so follow the steps very care fully and you will upgrade easily. You can Upgrade Any Phone to Jelly Bean.
And if you want to downgrade you phone to default android version follow this post How Downgrade To Any Android Firmware.
No Comment to " how to upgrade to jelly bean "